Cambridge Education

Making Your Own Replacement Key For Saab 93 Viggen

Saab owners who lose their keys may worry about the cost and inconvenience of replacing it. Fortunately, there is a solution to avoid these costs by creating your own key fob.

You'll require a phillips screwdriver that is flathead to accomplish this. Place the screwdriver flat in the slot in the middle of the case, and slowly open it.

Cost

Most SAABs have two keys when they're new, however certain used cars only have one. In this situation the owner will need to purchase new keys. This can be costly. Fortunately, there are many ways to save money during this process. For example, if you simply require a replacement for your key fob case you can save money by buying an older case from a dealership. These cases do not contain the emergency badge or key, and are prone to wear out fast.

In addition to the cost of buying a new key, you also have to pay for the installation and programming of the TWICE module. These expenses can quickly increase particularly if you have no spare key.

It is crucial to always have two keys in your vehicle. This way, in the event that you lose the only key that works, you won't be stuck without any transportation.

The good news is that adding an additional key to your Saab 9-3 isn't so difficult as it could seem. The only issue with this is that the key needs to be connected to the car's computer. This can be done by a dealer, but it could take a while to arrange an appointment. You will find all the information you require on the internet to guide you through the procedure.

Installation

Most Saab vehicles built after 1995 feature an immobilizer system which uses the key fob to control the engine. The system also controls remote and door locks for the vehicle. It is essential to keep an extra key to avoid losing your original key or having your vehicle stolen. The good thing is that should you lose your sole working Saab key there are ways to get it replaced without the need to pay for an expensive dealer service.

First, you need to make the new key fob. To do this, use a flathead to pry open the case. Simply insert the screwdriver into tiny slots in the middle of the case, and then gently work it. If you're having trouble, try using different angles. After you've opened up the case, you'll be able to remove the electronics and place them back in the new case.

Once you have the replacement fob as well as the key, you are able to begin the programing process. You will need to connect your Tech2 and follow the steps for Replacement Key For Saab 93 NG 9-3 with or without a transponder. It is recommended that you use a replacement TWICE unit that is already mated to the correct key via a transponder. You can locate this unit on the internet. But, you must be sure that it's an OEM replacement.

Programming

In general, adding an additional key for the Saab 9-3 needs an additional tool called Tech 2. Tech 2. It also involves programming the vehicle to recognize the new key. This process is more complex than simply copying the metal key, and should be handled by a professional to avoid harming the vehicle's electronic system. If you're thinking of adding the spare key to your car, it's best to get it done as soon as you can. Waiting could lead to higher costs in the future.

In addition to adding an alternative key, you'll also need to replace the CIM or TWICE module. This is usually an order by mail, and it's not something you can do by contacting an aftermarket retailer. The cost of a new car can be high, based on the car's model.

The dealer will charge the highest dollar to replace the car computer, but there's an alternative option! S.A. Locksmith & Security will reprogram your saab 93 key fob replacement computer to prepare it for the new key. This will reduce the cost of a new car computer. This service is quick, easy and inexpensive. You could save up to 50% on the amount the dealer would charge. This is a great solution for those who have lost their keys.

Remotes

The Saab 9-3 Viggen was one of the most distinctive cars to ever wear the Saab badge. It was an Scandinavian front-drive fighter jet-inspired monster that was swift and enjoyable to drive. There were many other Saab models followed, but few were as unique.

If you have a 9-3 Saab and lose your key fob it is crucial to replace it as soon as possible. Saab vehicles have an immobilizer device that requires a special key to begin. The replacement process is fairly easy if you own a spare key, however it could be costly and time-consuming if there isn't an extra.

You can save money by purchasing a second-hand replacement key fob and having it programmed by a locksmith in your area. Be careful when buying used keys on eBay and other online outlets. They may not be authentic, and you may pay more in the end.

Removing the electronics and battery from the old key fob is a simple process that anyone can do with a small flathead screwdriver. Be cautious not to harm the tiny electronic components in the case. Avoid pouring liquids into the case, as this could cause damage. Avoid buying cloned keys from aftermarket sellers, since they might not be paired with the CIM of your car.